Integrated Pressure Solar Water Heater

Characteristics：The tank for this model is a kind of closed type, the one with normal working pressure- 6bar, so it can be connected with city water directly. It will relief the pressure automatically, when the pressure is more than 6 bar inside the tank. And the water is heated rapidly by heat pipe which will transfer the heat energy into the tank (can refer the page 3 about heat pipe vacuum tube). This model can heat the water much faster than non-pressure and pre-heat models. The pressure of this model will be decided by the pressure of the tap water.  TypeVacuum tubeVolume(L)GrossWeight (KG)20GP/40HQ  Loading Qty(sets)Φ(mm)Length(mm)Qty(pcs)DIYI-IP01-10581800101006977/183DIYI-IP01-15581800151509155/130DIYI-IP01-205818002020011542/98DIYI-IP01-255818002525014335/81DIYI-IP01-255818003030017329/67Technical data:Inner tank: SUS 304-2B/1.2mm, Φ360mmOuter tank: Galvanized steel/0.41mm, Φ460mmInsulation Layer: high density polyurethane foam 50mmVacuum tube: 58*1800mm/SS-CU-ALN or AL-N-AL coatingBracket: Galvanized steel 1.5mm with 27/38/45 degree installing angle.Electrical heating connection(inch): ¾ or 1¼Water connection(inch):½ or ¾NOTE: All the systems are available for the customization.Optional Accessories1.Temperature Monitor (showing hot water temperature inside the main tank)2.Controller SR609 (showing hot water temperature inside the main tank & showing the water level & controlling the starting time of the electrical heater)3.Electrical Heater (as back-up for cloudy or rainy days)